Monthly Archives: May 2014

Lonely Whole Hops

(The following post is all meant in good fun. I’m not really hostile about other brewers’ practices. 🙂 )

 

I grow my own hops and have used them before. They’re Hallertau and great for making pilsners, harvest ales, beers where the hops can just be out of the way: fruit beers, spiced beers. I’ve written about whole hops on this blog before. I think I wasn’t kind.

That said, I’m calling out my fellow brewers who don’t say that whole hops are a pain in the ass. Who’s growing them, who’s harvesting them, who’s drying them, and who’s using them? (I know my dear friend Peter is using them and to great effect so feel free to comment, Peter, but I know you’re all over this 😉 )

I think there is a secret that needs to be told and I’ve said it here on the other post: Hops are a pain in the ass AND nobody really wants to deal with that despite what brewers say. The number of times I offer up a free rhizome split and all the positive responses and then… Nothing. Same for picking your own… Well, one person came (in 10 years of offering).

“Free hops. Come and pick your own. Pick whatever you want and take them home and brew with them.” *crickets*

It’s okay, fellow brewers, you can say it and admit it freely here and you won’t be ostracized: Whole hops are a pain in the ass.

All together now…

 

Advertisements

Brew Stand Brew Day

It’s all come together! It is, for all intents and purposes, done. There certainly is some tweaking to do and a few bits and pieces on my wish list but it works and makes a bunch of beer in one go.

My last brew day I took some pics to show the set up. Some of the line set up is not pretty but that is part of the tweaking. I’ll just have to have a few more brew days to figure it all out. 😉

This is generally what my driveway/brewery looks like on a brew day. The blue cooler is no longer a MLT but is now a bin to tote material from inside: scale, chiller, pumps, etc.

The Brewery

The Brewery

 

HLT set up for heating strike water. I recirculate the water as it’s heating just to avoid hot/cold layers. It makes the temp reading up top a bit more accurate. This is one place I could use an inline thermometer.

HLT

HLT

 

My fly sparge set up. HLT to pump to MLT. MLT to pump to BK. Flow adjusted so hot water into MLT is roughly the same rate as wort to BK. Works like a charm!

Fly sparge

Fly sparge

 

Top of MLT. Foil with holes just to avoid channeling in the grain bed.

Sparging

Sparging

 

Lauter line into BK. I had originally had the line with the tri clamp fitting as the lauter line and had that attached to the top port. This set up is better with the line going to the bottom of the BK. Less splashing, less foaming, easier to see volume when the wort gets near the top.

Lautering

Lautering

 

This is the set up for sanitizing the chiller. For the last 15 minutes of the boil I just recirculate wort through the lines and chiller. The line set up is not pretty and I’ll be tweaking that so that the moving of lines for cooling in and chasing wort with water is a bit easier and smoother. Using the MLT as a chiller stand was a last minute thought and works well. I had originally thought about mounting the chiller on the stand but knowing now how much back flushing is required it’s easier to have it loose for now.

Sanitizing Chiller

Sanitizing Chiller

 

Set up for cooling in. This basically works. The line from BK to pump needs to be on the other side of the keg the chiller is sitting on. Part of my waste water from the chiller is going back into the HLT so that when wort is done in the BK I chase the wort through the lines with the water from the HLT. This is another place I would use an inline thermometer just to adjust the flow and get the pitching temps right, or at least close.

Cooling In

Cooling In

There you have it! That’s basically a brew day on my new set up. Thanks to Clay for the build and thanks to Scott for the gas plumbing and pump box! Fantastic work!